Fiber Transceiver Networking Products NETLINK-HTB-GS-03B Optical Transceiver Gigabit Single Mode Single Fiber Optical Converter B End
(as of Jul 07,2022 05:17:29 UTC – Details)
Cable type: single fiber
Transmission distance: 5 (km)
Transmission method: fiber
Emission wavelength: 1550 (nm)
Transmit power: -5 (dbm)
Voltage input: 5 (V)
The SC fiber interface is duplex mode and includes two interfaces, TX and RX. When two sets of optical converters are connected or connected to a switch with a fiber interface, the fiber is cross-connected, that is, "TX-RX" and "RX-TX".
Connect the network device (workstation, hub or switch) to the RJ-45 jack of the optical converter via twisted pair CAT5. Connect the multimode/single mode fiber to the SC / ST / LC fiber interface of the optical transceiver. Turn on the power. The corresponding LED lights up to indicate that the connection is correct.
Excessive line loss during fiber routing
Excessive loss of adapter connector plug-ins and fiber soldering and excessive intermediate nodes can result in excessive loss rates or abnormal operation.
If the power loss in the fiber is too large, check and clean the fiber jumper connector.
This product is suitable for indoor application.
Put on the dust cover of fiber interface when not used.
It is forbidden to stare at the TX fiber-transfer end with naked eyes.
Single optical fiber transceiver must be used in pair